| Customization: | Available |
|---|---|
| Type: | Li-ion Battery |
| Cathode Material: | NCM |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Introduction:
YJ-SM200 is suitable for the lamination process of battery cells. Z-type lamination of positive and negative plates and separators is a device that can be applied to the lamination process of lithium ion battery pole pieces. The equipment adopts the automatic tension control system of the isolation membrane. The cylinder drives the diaphragm to move left and right to realize the zigzag lamination. The cantilever design is easy to operate. Compared with the manual laminator, this device has the characteristics of high lamination efficiency, good lamination uniformity, and a wide range of applicable battery sizes. It is an ideal choice for R & D sample production and small batch trial production equipment.
|
Lamination accuracy |
Regularity is better than ± 0.5mm |
|
Lamination thickness |
Max.12mm |
|
Diaphragm roll diameter |
Max. 220mm |
|
Air source |
0.4 ~ 0.6MPa compressed air |
|
Lamination size (including the length of the pole ear) |
Min. L44mm * W44mm (the tablet needs to be replaced if it is smaller) Max. L200mm * W150mm (pole ear on the long side) |
|
Operating environment |
The recommended ambient temperature is 25 ± 3 , humidity is 30 ~ 90RH, no vibration and electromagnetic interference |
|
Electricity |
Voltage single-phase 220VAC ± 10% (customizable 110VAC), frequency 50Hz / 60Hz, power 200W |
|
Dimensions |
L510mm * W825mm * H585mm |
|
Weight |
80kg |
){kind=link}