Customization: | Available |
---|---|
Type: | Li-ion Battery |
Cathode Material: | NCM |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Introduction: |
I. Glove Box Specification: |
1. Function:
l Closed Recirculation
The Inert Gases will be closed recirculation by Fan and Cleaner, to continuously remove water and oxygen.
l Automatic Control Regeneration
The materials for dehydration and deoxidization can be regeneration by programmed control.
l Automatic Cleaning
Gas replacement can be taken by automatic controlled cleaning valve.
l Box Pressure Control
Pressure inner box has PLC controlling, working pressure (+/- 10mbar) can be freely set and auto-protected (exceeding +/- 12mbar).
l Vacuum Pump Auto-control
Vacuum Pump will be auto-opening for systems'demands.
2. Main Composition and Basic Configuration: |
Closed Box (With Gradient Worktop and Dismountable Safe Glass Window), Pass Box, Cycling Scavenging Unit, PLC & Touch Panel, Vacuum System, Display System, Holder, etc.
1 sets of st. st#316 box, thickness: 3mm, corrosion resisting.
1 sets of vacuum passing box. Dia.: 360mm, Length: 600mm, right side.
1 sets of small passing box. Dia.: 150mm, Length: 300mm, right side.
1 glass windows with 5 pairs of gloves positions
1 pairs of butyl rubber gloves.
1 sets of lighting system.
1 set of power interface inner box
1 sets of high-powered cycling fan.
1 vacuum pumps
PLC & Touch Panel
3 blind flange
Stand wheel
Foot Switch
Water analyser
Oxygen analyser
3. Main Data: |
Moisture and Oxygen Index:less 1 ppm;
Leakage rate: less than 0.05 vol% / h;
4. Technical Index: |
1) Box Body |
l Main body:
Material:304st.,Thickness: 3mm
Internal surface:Stainless steel wiredraw treat
Outside surface:Painting,White
Inner Dimension: L: 1220mm Depth:750mm;H: 900mm
Gradient window, tempering glass, thickness: 8mm
l Gloves Hole: Anodised Aluminium, O ring enclosed
l Gloves: Butyl Rubber, thickness: 0.4mm, Dia.: 8", Length: 32".
l Filter: 0.3 micron (0.12 micron optional), 1 gas entrance and 1 gas exist.
l Shelf: St. steel, 2 levels
l Box lighting: Fluorescent lamp, set above the window.
l Connector: 3 spare connectors, DN 40KF. 1 Power interface (220V)
2) Big Passing Box: |
l Passing Box:
Dimension:Dia.: 360mm,L: 600mm
Material:304 St. steel.
Internal surface:Stainless steel wiredraw treat
Outside surface:Painting,White
l Accessories:
Sliding pallet:304 St. steel.
Gate:double gate,anodised aluminium,thickness 10mm, vertical operation with lifting
Pressure gage: simulation display
l Control:
solenoid valve, touch panel, automatic
3) Small Passing Box: |
l Passing box:
Dimension:Dia.: 150mm, L: 300mm, enter the glove box section length is 100 mm.
Material:304 St. steel.
Internal surface:Stainless steel wiredraw treat
Outside surface:Painting,White)
l Accessories:
Gate:double gate, screw-threaded coupling
Pressure gage: simulation display
l Control:
Manual Valve
4) Gas Purification System |
l Purification Post
Function: Gas obturation, dehydration, deoxidization
Material:304 St. steel.
Purification Material: Copper Catalyst: 5 kg
Molecular Sieve: 5 kg
Purification Capacity: deoxidization: 60L
Dehydration: 2Kg,
l Moisture and Oxygen Index:less 1 ppm;
l Cycling System
Gas: Nitrogen, Argon
Capacity: 90m3/h, frequency conversion
l Regeneration
PLC Auto-operate
Gas: Mixed gas with hydrogen (hydrogen5-10%)
l Vacuum Pump
Specification:8 m3 /h(12 m3 /h optional),Rotary pumpoil mist filter
l Valve
Main Valve:DN 40 KF , electronic pneumatic angle valve.
Control Valve: electronic pneumatic pileup valve
5) Control System |
l Function:
l Self diagnosis, Restart, Pressure control, adaptive function. Auto control, Cycle control, Crypto guard; Siemens PLC & Touch Panel
l Pressure Control
Pressure inner box has PLC controlling, working pressure (+/- 10mbar) can be freely set and auto-protected (exceeding +/- 12mbar).
l Foot Switch: Control box pressure.
6) Display System |
Siemens PLC & Touch Panel (PT177), Show running status, box pressure, system record
7) Vacuum System Control |
British EDWARDS vacuum pump,start by manual or PLC, 8m3/h (optional: 12 m3 /h, final vacuum≤2x10-1pa
8) Optional Accessories |
l Moisture analyser:
Range:0~500ppm
Sensor with the P2O5 application range is wide, especially for li-ion battery manufacturing and metal organic users, can be washed and reused, avoid the pollution the scrap problem at a time.
l Oxygen analyser:
Range: 0~1000ppm (ZrO2 sensor)
ZrO2 sensor is adopted to avoid the fuel battery life is short and solve the problem that don't exposed to the air.
l Solvent adsorber
Dimention:Dia.: 150mm, Height: 325mm,
Material:St. steel 304, thickness: 3mm,3kg of activated carbon.
Parallel with the main loop pipeline, manual control valve, circulation gas can be first through the adsorber, adsorption of volatile organic solvents.